DTNMA Application Resource Identifier (ARI)

Internet-Draft	DTNMA ARI	July 2024
Birrane, et al.	Expires 22 January 2025	[Page]

Abstract

This document defines the structure, format, and features of the naming scheme for the objects defined in the Delay-Tolerant Networking Management Architecture (DTNMA) Application Management Model (AMM), in support of challenged network management solutions described in the DTNMA document.¶

This document defines the DTNMA Application Resource Identifier (ARI), using a text-form based on the common Uniform Resource Identifier (URI) and a binary-form based on Concise Binary Object Representation (CBOR). These meet the needs for a concise, typed, parameterized, and hierarchically organized set of managed data elements.¶

1. Introduction

The unique limitations of Delay-Tolerant Networking (DTN) transport capabilities [RFC4838] necessitate increased reliance on individual node behavior. These limitations are considered part of the expected operational environment of the system and, thus, contemporaneous end-to-end data exchange cannot be considered a requirement for successful communication.¶

The primary DTN transport mechanism, Bundle Protocol version 7 (BPv7) [RFC9171], standardizes a store-and-forward behavior required to communicate effectively between endpoints that may never co-exist in a single network partition. BPv7 might be deployed in static environments, but the design and operation of BPv7 cannot presume that to be the case.¶

Similarly, the management of any BPv7 protocol agent (BPA) (or any software reliant upon DTN for its communication) cannot presume to operate in a resourced, connected network. Just as DTN transport must be delay-tolerant, DTN network management must also be delay-tolerant.¶

The DTN Management Architecture (DTNMA) [I-D.ietf-dtn-dtnma] outlines an architecture that achieves this result through the self-management of a DTN node as configured by one or more remote managers in an asynchronous and open-loop system. An important part of this architecture is the definition of a conceptual data schema for defining resources configured by remote managers and implemented by the local autonomy of a DTN node.¶

The DTNMA Application Management Model (AMM) [I-D.ietf-dtn-amm] defines a logical schema that can be used to represent data types and structures, autonomous controls, and other kinds of information expected to be required for the local management of a DTN node. The AMM further describes a physical data model, called the Application Data Model (ADM), that can be defined in the context of applications to create resources in accordance with the AMM schema. These named resources can be predefined in moderated publications or custom-defined as part of the Operational Data Model (ODM) of an agent.¶

Every AMM resource must be uniquely identifiable. To accomplish this, an expressive naming scheme is required. The Application Resource Identifier (ARI) provides this naming scheme. This document defines the ARI, based on the structure of a Uniform Resource Identifier (URI), meeting the needs for a concise, typed, parameterized, and hierarchically organized naming convention.¶

1.1. Scope

The ARI scheme is based on the structure of a URI [RFC3986] in accordance with the practices outlined in [RFC8820].¶

ARIs are designed to support the identification requirements of the AMM logical schema. As such, this specification will discuss these requirements to the extent necessary to explain the structure and use of the ARI syntax.¶

This specification does not constrain the syntax or structure of any existing URI (or part thereof). As such, the ARI scheme does not impede the ownership of any other URI scheme and is therefore clear of the concerns presented in [RFC7320].¶

This specification does not discuss the manner in which ARIs might be generated, populated, and used by applications. The operational utility and configuration of ARIs in a system are described in other documents associated with DTN management, to include the DTNMA and AMM specifications.¶

This specification does not describe the way in which path prefixes associated with an ARI are standardized, moderated, or otherwise populated. Path suffixes may be specified where they do not lead to collision or ambiguity.¶

This specification does not describe the mechanisms for generating either standardized or custom ARIs in the context of any given application, protocol, or network.¶

1.2. Use of ABNF

This document defines text structure using the Augmented Backus-Naur Form (ABNF) of [RFC5234]. The entire ABNF structure can be extracted from the XML version of this document using the XPath expression:¶

'//sourcecode[@type="abnf"]'

The following initial fragment defines the top-level rules of this document's ABNF.¶

start = ari

From the document [RFC3986] the definitions are taken for pchar, unreserved, pct-encoded. From the document [RFC3339] the definitions are taken for date-time, full-date, and duration. From the document [RFC5234] the definitions are taken for bit, hexdig, digit, and char-val. From the document [RFC8259] the definitions are taken for char and unescaped.¶

1.3. Use of CDDL

This document defines Concise Binary Object Representation (CBOR) structure using the Concise Data Definition Language (CDDL) of [RFC8610]. The entire CDDL structure can be extracted from the XML version of this document using the XPath expression:¶

'//sourcecode[@type="cddl"]'

The following initial fragment defines the top-level symbols of this document's CDDL, which includes the example CBOR content.¶

start = ari

; Limited sizes to fit the AMM data model
int32 = (-2147483648 .. 2147483647) .within int
uint32 = uint .le 4294967295
int64 = (-9223372036854775808 .. 9223372036854775807) .within int
uint64 = uint

; Restricted identifier text
id-text = tstr .regexp "[A-Za-z_][A-Za-z0-9_-\.]*"

This document does not rely on any CDDL symbol names from other documents.¶

1.4. Terminology

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶

The terms "Application Data Model", "Application Resource Identifier", "Operational Data Model", "Externally Defined Data", "Variable", "Constant", "Control", "Literal", "Macro", "Namespace", "Operator", "Report", "Report Template", "Rule", "State-Based Rule", "Table", and "Time-Based Rule" are used without modification from the definitions provided in [I-D.ietf-dtn-amm].¶

3. ARI Logical Structure

This section describes the information model of the ARI scheme to inform the discussion of the ARI syntax in Section 4 and Section 5. At the top-level, an ARI represents one of of the following AMM value classes defined in later subsections.¶

Literal values:: These are values are those whose value and identifier are equivalent and are discussed in more detail in Section 3.2.¶
Object Reference values:: These values refer to an individual object, possibly with parameters, and are discussed in Section 3.3.¶
Namespace Reference values:: These values refer to an individual namespace and are discussed in Section 3.4.¶

3.1. Names, Enumerations, Comparisons, and Canonicalizations

Within the ARI logical model, there are a number of domains in which items are identified by a combination of text name and integer enumeration: ADMs, ODMs, literal types, object types, and objects. In all cases, within a single domain the text name and integer enumeration SHALL NOT be considered comparable. It is an explicit activity by any entity processing ARIs to make the translation between text name and integer enumeration (see Section 8).¶

Text names SHALL be restricted to begin with an alphabetic character followed by any number of other characters, as defined in the id-text ABNF symbol. This excludes a large class of characters, including non-printing characters. When represented in text form, the text name for ODMs is prefixed with a "!" character to disambiguate it from an ADM name (see Section 3.3).¶

For text names, comparison and uniqueness SHALL be based on case-insensitive logic. The canonical form of text names SHALL be the lower case representation.¶

Integer enumerations for ADMs and ODMs SHALL be restricted to a magnitude less than 2**63 to allow them to fit within a signed 64-bit storage. The ADM registration in Table 5 reserves high-valued code points for private and experimental ADMs, while the entire domain of ODM code points (negative integers) is considered private use. Integer enumerations for literal types and object types SHALL be restricted to a magnitude less than 2**31 to allow them to fit within a signed 32-bit storage. The registrations in Table 2 and Table 3 respectively Integer enumerations for objects (within an ADM or ODM) SHALL be restricted to a magnitude less than 2**31 to allow them to fit within a signed 32-bit storage, although negative-value object enumerations are disallowed.¶

For integer enumerations, comparison and uniqueness SHALL be based on numeric values not on encoded forms. The canonical form of integer enumerations in text form SHALL be the shortest length decimal representation.¶

3.2. Literals

Literals represent a special class of ARI which are not associated with any particular ADM or ODM. A literal has no other name other than its value, but literals may be explicitly typed in order to force the receiver to handle it in a specific way.¶

Because literals will be based on the CBOR data model [RFC8949] and its extended diagnostic notation, a literal has an intrinsic representable data type as well as an AMM data type. The CBOR primitive types are named CDDL symbols as defined in Section 3.3 of [RFC8610].¶

When converting from AMM literal types, the chosen CBOR type SHALL be determined by the mapping in Table 1. Additionally, when handling typed literal ARIs any combination of AMM literal type and CBOR primitive type not in Table 1 SHALL be considered invalid. This restriction is enforced by the CDDL defined in Section 5. Additionally, when handling a literal of AMM type CBOR the well-formed-ness of the CBOR contained SHOULD be verified before the literal is treated as valid.¶

Table 1: AMM Literal Types to CBOR Types
AMM Literal Type	Used CBOR Type
`NULL`	`null`
`BOOL`	`bool`
`BYTE`	`uint`
`INT`	`int`
`UINT`	`uint`
`VAST`	`int`
`UVAST`	`uint`
`REAL32`	`float`
`REAL64`	`float`
`TEXTSTR`	`tstr`
`BYTESTR`	`bstr`
Non-primitive types
`TP`	`lit-time`
`TD`	`lit-time`
`LABEL`	`lit-label`
`CBOR`	`lit-cbor`
Containers
`AC`	`ari-collection`
`AM`	`ari-map`
`TBL`	`ari-tbl`
`EXECSET`	`exec-set`
`RPTSET`	`rpt-set`

3.3. Object References

Object references are composed of two parts: object path and optional parameters. The object path can be dereferenced to a specific object in the ADM/ODM, while the parameters provide additional information for certain types of object and only when allowed by the parameter "signature" from the ADM/ODM.¶

The object path itself contains the components, described in the following subsections: namespace ID, object type, and object ID. When encoded in text form (see Section 4), the path components correspond to the URI path segments.¶

3.3.1. Namespace ID

ADM resources exist within namespaces to eliminate the possibility of a conflicting resource name, aid in the application of patterns, and improve the compressibility of the ARI. Namespaces SHALL NOT be used as a security mechanism to manage access. An Agent or Manager SHALL NOT infer security information or access control based solely on namespace information in an ARI.¶

Namespace IDs have two possible forms; one more human-friendly and one more compressible:¶

Text form:: This form corresponds with a human-readable identifier for either an ADM or a ODM namespace. The text form is not compressible and needs to be converted to a numeric namespace based on a local registry. A text form namespace SHALL contain only URI path segment characters representing valid UTF-8 text in accordance with [RFC3629].¶
Numeric form:: This form corresponds with a compressible value suitable for on-the-wire encoding between Manager and Agent. Sorting and matching numeric namespaces is also faster than text form. A numeric form namespace SHALL be small enough to be represented as a 64-bit signed integer.¶

Independent to the form of the namespace is the issuer of the namespace, which is one of:¶

ADM namespace:: When a namespace is associated with an ADM, its text form SHALL begin with an alphabetic character and its numeric form SHALL be a positive integer. All ADM namespaces are universally unique and, except for private or experimental use, SHOULD be registered with IANA (see Table 5).¶
ODM namespace:: When a namespace is not associated with an ADM, its text form SHALL begin with a bang character "!" and its numeric form SHALL be a negative integer. These namespaces do not have universal registration and SHALL be considered to be private use. It is expected that runtime ODM namespaces will be allocated and managed per-user and per-mission.¶

3.3.2. Object Type

Due to the flat structure of an ADM, as defined in [I-D.ietf-dtn-amm], all managed objects are of a specific and unchanging type from a set of available managed object types. The preferred form for object types in text ARIs is the text name, while in binary form it is the integer enumeration (see Section 8).¶

The following subsection explains the form of those object identifiers.¶

3.3.3. Object ID

An object is any one of a number of data elements defined for the management of a given application or protocol that conforms to the ADM logical schema.¶

Within a single ADM or runtime namespace and a single object type, all managed objects have similar characteristics and all objects are identified by a single text name or integer enumeration. The preferred form for object names in text ARIs is the text name, while in binary form it is the integer enumeration. Any ADM-defined object will have both name and enumeration, while a runtime-defined object can have either but not both. Conversion between the two forms requires access to the original ADM, and its specific revision, in which the object was defined. A text form object name SHALL contain only URI path segment characters representing valid UTF-8 text in accordance with [RFC3629].¶

3.3.4. Parameters

The ADM logical schema allows many object types to be parameterized when defined in the context of an application or a protocol.¶

If two instances of an ADM resource have the same namespace and same object type and object name but have different parameter values, then those instances are unique and the ARIs for those instances MUST also be unique. Therefore, parameters are considered part of the ARI syntax.¶

The ADM logical schema defines specialized uses for the term "parameter" to disambiguate each purpose, as defined below.¶

Formal Parameters:

Formal parameters define the type, name, and order of the information that customizes an ARI. They represent the unchanging "signature" of the parameterized object. Because ARIs represent a use of an object and not its definition, formal parameters are not present in an ARI and instead are part of an object model.¶

Given Parameters:

Given parameters represent the data values used to distinguish different instances of a parameterized object. A given parameter is an AMM value and is represented by an ARI within the context of a parameter list (AC) or parameter map (AM). Because of necessary normalizing (of type and default value) based on formal parameters, multiple given parameters can correspond with the same meaning (see Actual Parameters below).¶

Additionally, there are two ways in which the value of a given parameter can be specified: parameter-by-value and parameter-by-name.¶

Parameter-By-Value:: This method involves directly supplying the value as part of the actual parameter. It is the default method for supplying values.¶
Parameter-By-Name:: This method involves specifying the name of an other parameter and using that other parameter's value as a substitute for the value of this parameter. This method is useful when a parameterized ARI is produced by an AMM object which itself is parameterized. The original ARI parameters contain literal ARIs with LABEL type, and when the value is produced based on input parameters the substitution is made. In this way, an actual parameter can be "flowed down" to produced values at runtime.¶

Actual Parameters:

Actual parameters represent a normalized set of values taken from a set of given parameters and normalized using a set of corresponding formal parameters. An actual parameter is an AMM value and is represented by an ARI.¶

Because normalizing can cause a given parameter to change type (in order to conform to a formal parameter type) or take on a default value (when not present in the given parameters), a single set of actual parameters can correspond with multiple options for given parameters.¶

3.4. Namespace References

A namespace reference is composed of a single part, the namespace ID, which is used to refer to an entire ADM or ODM. It is treated as a separate class of ARI in order to separate it from the additional required parts of an Object Reference (object type and object ID). The purpose of a namespace reference is to give an ARI value to the whole namespace separately from any of its contained objects.¶

4. ARI Text Form

This section defines how the data model explained in Section 3 is encoded as text conforming to the URI syntax of [RFC3986]. The most straightforward text form of ARI uses an explicit scheme and an absolute path (starting with an initial slash "/"), which requires no additional context to interpret its structure.¶

When used within the context of a base ARI, the URI Reference form of Section 4.5 can be used. In all other cases an ARI must be an absolute-path form and contain a scheme.¶

While this text description is normative, the ABNF schema in this section provides a more explicit and machine-parsable text schema. The scheme name of the ARI is "ari" and the scheme-specific part of the ARI follows one of the two forms corresponding to the literal-value ARI and the object reference ARI.¶

ari = [ARIPREFIX] ari-ssp
ari-ssp = lit-ssp-struct / objref-ssp-struct / nsref-ssp-struct

; restricted to only a subset of "ari" symbol
lit-ari = [ARIPREFIX] lit-ssp-struct
objref-ari = [ARIPREFIX] objref-ssp-struct

ARIPREFIX = "ari:"

4.1. URIs and Percent Encoding

Due to the intrinsic structure of the URI, on which the text form of ARI is based, there are limitations on the syntax available to the scheme-specific-part [RFC7595]. One of these limitations is that each path segment can contain only characters in the pchar ABNF symbol defined in [RFC3986]. For most parts of the ARI this restriction is upheld by the values themselves: ADM/ODM names, literal and object type names, and object names have a limited character set all within the symbol val-seg. For literals and nested parameters though, the percent encoding of Section 2.4 of [RFC3986] is needed.¶

The following symbol val-seg is an allowed superset of all path segment patterns, which includes ARI-specific control characters.¶

; A subset of RFC 3986 segment-nz and pchar symbols which matches all
; identifiers, primitive values, and typed-literal values
val-seg = 1*( unreserved / pct-encoded / val-delims)
val-delims = "!" / "'" / "+" / ":" / "@"

; A text name must start with an alphabetic character or underscore
id-text = (ALPHA / "_") *(ALPHA / DIGIT / "_" / "-" / ".")
; An integer enum must contain only digits with no zero padding
id-num = nopad-number

nopad-number = "0" / non-zero-number
non-zero-number = %x31-39 *DIGIT
DIGIT = %x30-39

In the ARI text examples in this document the URIs have been percent-decoded for clarity, as might be done in an ARI display and editing tool. But the actual encoded form of the human-friendly ARI ari:"text" is ari:%22text%22. Outside of literals, the safe characters which are not be percent-encoded are the structural delimiters /()=;, used for parameters and ARI collections.¶

One other aspect of convenience for human editing of text-form ARIs is linear white space. The current ABNF pattern, staying within the URI pattern, do not allow for whitespace to separate list items or otherwise. A human editing an ARI could find it convenient to include whitespace following commas between list items, or to separate large lists across lines. Any tool that allows this kind of convenience of editing SHALL collapse any white space within a single ARI before encoding its contents.¶

4.2. Literals

Based on the structure of Section 3.2, the text form of the literal ARI contains only a URI path with an optional AMM literal type. A literal has no concept of a namespace or context, so the path is always absolute. When the path has two segments, the first is the AMM literal type and the second is the encoded literal value. When the path has a single segment it is the encoded literal value. As a shortcut, an ARI with only a single path segment is necessarily an untyped literal so the leading slash is elided.¶

The text form of literal ARI has two layers of coding: the URI path structure and the type-specific value coding. These are distinguished below in the ABNF by the lit-ssp-struct symbol being for the general path structure and type-specific coding defined in Section 4.2.1.¶

lit-ssp-struct = lit-container / lit-typeval-struct
               / lit-notype-struct

; More complex text for non-primitive values
lit-typeval-struct = "/" lit-type "/" val-seg
; Type is restricted to valid literal types, within the "val-seg" set
lit-type = id-text / id-num

; Containers use different structure than lit-typeval-struct
; because of rule recursion
lit-container = lit-ac / lit-am / lit-tbl / lit-execset / lit-rptset
lit-ac = "/" ("AC" / "17") "/" ari-collection
lit-am = "/" ("AM" / "18") "/" ari-map
lit-tbl = "/" ("TBL" / "19") "/" ari-tbl
lit-execset = "/" ("EXECSET" / "20") "/" exec-set
lit-rptset = "/" ("RPTSET" / "21") "/" rpt-set

; The untyped value is a subset of the "lit-notype" symbol
lit-notype-struct = val-seg

4.2.1. Typed Literal Values

The definition in this section is a specialization of the lit-typeval-struct structure for specific literal types.¶

An ARI encoder or decoder SHALL handle both text name and integer enumeration forms of the lit-type symbol. When present and able to be looked up, the literal type SHOULD be a text name.¶

The text form of typed values SHALL be one of the following, based on the associated lit-type value in the ARI:¶

NULL:

This type contains only the single the fixed value "null".¶

null = "null"

BOOL:

This type contains the two fixed values "true" and "false".¶

bool = "true" / "false"

BYTE, INT, UINT, VAST, or UVAST:

The integer types, signed or unsigned, match the following integer ABNF symbol. Each specific type will limit the domain of valid values within this more general encoding.¶

integer = int-dec / int-bin / int-hex
int-dec = optsign 1*DIGIT
int-bin = optsign "0b" 1*BIT
int-hex = optsign "0x" 1*HEXDIG
optsign = ["+" / "-"]

REAL32 or REAL64:

The floating-point types match the following float ABNF symbol, which includes a hexadecimal form that avoids decimal conversion of the underlying value. All of these forms conform to the text representations defined in Section 5.12 of [IEEE.754-2019] for binary16, binary32, or binary64 values.¶

float = float-exp / float-dec / float-hex
; Decimal exponential corresponds with C99 '%e' format
float-exp = optsign 1*DIGIT ["." 1*DIGIT] "e" optsign 1*DIGIT
; Decimal fraction corresponds with C99 '%f' format
float-dec = optsign 1*DIGIT "." *DIGIT
; Hexadecimal exponential corresponds with C99 '%a' format
float-hex = optsign "0x" 1*HEXDIG "." *HEXDIG
            ["p" optsign 1*DIGIT]

TEXTSTR:

The text string type matches the following tstr ABNF symbol after percent-decoding, which is consistent with the CBOR EDN definition. As an alternative, if the text value matches the id-text character set it can be encoded directly without quoting.¶

tstr = tstr-quoted / id-text
; double-quoted and escaped text logic from Section 7 of RFC 8259
tstr-quoted = DQUOTE *char DQUOTE
DQUOTE = %x22

BYTESTR:

The byte string type matches the following bstr ABNF symbol after percent-decoding, which is consistent with the CBOR EDN definition restricted to only utf8, base16, and base64url encodings. The non-prefixed form of byte string SHALL only be used if the value contains UTF-8 text in accordance with [RFC3629]. When using the "h" prefix the base16 encoding from Section 8 of [RFC4648] SHALL be used. When using the "b64" prefix only the base64url encoding from Section 5 of [RFC4648] SHALL be used as this avoids unnecessary percent encodings.¶

bstr = bstr-utf8 / bstr-b16 / bstr-b64
; Escaped text logic from Section 7 of RFC 8259
bstr-utf8 = SQUOTE *char SQUOTE
; Encoding of Section 8 of RFC 4648
bstr-b16 = "h" SQUOTE *(2HEXDIG) SQUOTE
; Encoding of Section 5 of RFC 4648
bstr-b64 = "b64" SQUOTE *(ALPHA / DIGIT / "-" / "_") *EQ SQUOTE
SQUOTE = %x27
EQ = %x3D

TP:

This type uses either the date-time ABNF symbol of Appendix A of [RFC3339] always in the "Z" time-offset, or as a decimal representation of the relative time from the DTN Epoch. This text is unquoted and, to avoid percent encoding, this text form MAY omit the separator characters "-" and ":".¶

tp-val = date-time / float-dec / integer

TD:

This type uses either the duration ABNF symbol of Appendix A of [RFC3339] with a positive or negative sign prefix, or as a decimal representation of the relative time value. This text is unquoted and due to the constraints on the value need not be percent encoded.¶

td-val = duration / float-dec / integer

LABEL:

This type uses the following lit-label ABNF symbol from this document. This text is unquoted and due to the constraints on the value need not be percent encoded.¶

lit-label = id-text / id-num

CBOR:

This type uses the following emb-cbor ABNF symbol for its value. The first encoding choice uses the percent encoded form of CBOR extended diagnostic notation (EDN) of Appendix G of [RFC8610]. The second encoding is the raw byte string of the embedded CBOR.¶

emb-cbor = cbor-diag / bstr
cbor-diag = "<<" *(%x20-3B / %x3D / %x3F-7E) ">>"

AC:

This type uses the following ari-collection ABNF symbol for its value. Each item of the collection is an already-percent-encoded text-form ARI.¶

; A comma-separated list of any form of ARI with enclosure
ari-collection = "(" [ari-collection-list] ")"
ari-collection-list = ari *("," ari)

AM:

This type uses the following ari-map ABNF symbol for its value. Each key of the map is an already-percent-encoded text-form literal-value ARI. Each value of the map is an already-percent-encoded text-form ARI.¶

; A comma-separate list of pairs, each delimited by equal-sign
; with literal-only keys
ari-map = "(" [ari-map-list] ")"
ari-map-list = ari-map-pair *("," ari-map-pair)
ari-map-pair = lit-notype "=" ari

TBL:

This type uses the following ari-tbl ABNF symbol for its value. The value is prefixed by the number of columns in the table, followed by an AC representing each separate row in the table. Each item of the table is an already-percent-encoded text-form ARI.¶

ari-tbl = "c=" nopad-number ";" *ari-collection

EXECSET:

This type uses the following exec-set ABNF symbol for its value. The value is prefixed by the optional nonce value for the associated execution(s), followed by an AC representing each item to be executed (either a CTRL reference, MAC-producing reference, or MAC value). Each item of the targets is an already-percent-encoded text-form ARI.¶

exec-set = "n=" exec-nonce ";" exec-targets
exec-nonce = null / integer / bstr
exec-targets = ari-collection

RPTSET:

This type uses the following rpt-set ABNF symbol for its value. The value consists of the optional nonce value for the associated execution(s), a reference absolute time for all contained reports, and the list of contained reports. Each contained report consists of a relative creation time for the report (relative to the RPTSET reference time), a reference to the source of the report, and an AC representing each item in the report. Each item of a report is an already-percent-encoded text-form ARI, as is the source reference. The nonce and timestamps are all literal values constained to specific value types.¶

rpt-set = "n=" exec-nonce ";r=" lit-ari ";" *rpt-container
rpt-container = "(t=" lit-ari ";s=" objref-ari ";" rpt-items ")"
rpt-items = ari-collection

Some examples of typed literal values are below. The represented values for TP, TD, and CBOR types are the same just with different text representations.¶

ari:/BOOL/true
ari:/UINT/10
ari:/VAST/10
ari:/LABEL/name
ari:/TP/20230102T030405Z
ari:/TP/2023-01-02T03:04:05Z
ari:/TP/725943845
ari:/TD/+PT1H
ari:/TD/3600
ari:/CBOR/h'0a'
ari:/CBOR/%3C%3C10%3E%3E

These are typed container values with text form for AC and AM lists:¶

ari:/AC/(1,2,3)
ari:/AM/(1=2,2=4,3=9)
ari:/TBL/c=3;(1,true,%22A%22)(2,false,%22B%22)

And these are a pair of EXECSET and RPTSET with identical nonce value:¶

ari:/EXECSET/n=1234;(//example-adm-a/CTRL/dothing,//example-adm-a/CONST/amacro)
ari:/RPTSET/n=1234;r=/TP/20230102T030405Z;(t=/TD/PT0S;s=//example-adm-a/CTRL/dothing;(null))(t=/TD/PT5S;s=//example-adm-a/CONST/amacro;(null))

4.2.2. Untyped Literal Values

The definition in this section is a specialization of the lit-notype-struct structure for specific primitive types.¶

When untyped, the literal value SHALL be one of the primitive types named by the lit-notype ABNF symbol below. The separate value encodings use symbols from Section 4.2.1.¶

lit-notype = undefined / null / bool / float / integer / tstr / bstr
; the undefined value is only valid as an untyped literal
undefined = "undefined"

Some example of untyped literals are below.¶

ari:undefined
ari:true
ari:1.1
ari:1.1e+06
ari:0x1.4p+3
ari:10
ari:0xA
ari:0b1010
ari:-0x10
ari:'bytes'
ari:h'6279746573'
ari:b64'Ynl0ZXM='
ari:%22text%22
ari:%22hi%5Cu1234%22
ari:%22hi%5CuD834%5CuDD1E%22

4.2.3. Preferred Encodings

Several of the literal types defined in Section 4.2.1 allow the same AMM value to be represented by multiple logically equivalent encodings. Because these encodings are not equivalent in represented text size or processing needs it is useful for an ARI processor to allow a user to determine preferred encodings when processing text-form ARIs.¶

Integer values:: These options correspond to the BYTE, INT, UINT, VAST, and UVAST types and untyped int values. These values can be encoded as either base-2, base-10, or base-16. In uses which are more resource constrained and less human-facing a processor MAY encode integers only in base-16.¶
Floating point values:: These options correspond to the REAL32 and REAL64 types and untyped float values. These values can be encoded as either decimal fraction, decimal exponential, or hexadecimal exponential. In uses which are more resource constrained and less human-facing a processor MAY encode floats only as hexadecimal.¶
Byte string values:: These options correspond to the BYTESTR type and untyped bstr values. These values can be encoded as either raw bytes, base16, or base64url. In uses which are more resource constrained and less human-facing a processor MAY encode byte strings only as base16.¶
Time values:: These options correspond to the TP and TD types. These values can be encoded as either delimited text, non-delimited text, or decimal fraction. In uses which are more resource constrained and less human-facing a processor MAY encode time values only as decimal fraction.¶
Embedded CBOR values:: These options correspond to the CBOR type. These values can be encoded as either CBOR EDN or as a byte string. In uses which are more resource constrained and less human-facing a processor MAY encode CBOR values only as byte strings.¶

4.3. Object References

Based on the structure of Section 3.3, the text form of the object reference ARI is a URI with an authority, corresponding to the namespace-id, and two path segments, corresponding to the object-type and object-id. Those three components (excluding parameters as defined below) are referred to as the object path.¶

An ARI encoder or decoder SHALL handle both text name and integer enumeration forms of the namespace-id, object-type, and object-id.¶

The final segment containing the object-id MAY contain parameters enclosed by parentheses "(" and ")". There is no semantic distinction between the absence of parameters and the empty parameter list. The contents of the parameters SHALL be interpreted as a literal AC or AM in accordance with Section 4.2.¶

The parameters as a whole SHALL be the percent encoded form of the constituent ARIs, excluding the structural delimiters /(),=. Implementations are advised to be careful about the percent encoded vs. decoded cases of each of the nested ARIs within parameters to avoid duplicate encoding or decoding. It is recommended to dissect the parameters and ARI collections in their encoded form first, and then to dissect and percent decode each separately and recursively.¶

The object reference ARI has the following ABNF definition.¶

objref-ssp-struct = obj-path [paramlist]
; The object path can be used separately than parameters
obj-path = ns-part "/" obj-type "/" obj-id
; Parameters are either AC or AM
paramlist = ari-collection / ari-map

; Absolute or relative namespace
ns-part = ("//" ns-id) / "."
; Namespace ID, within the "val-seg" set
ns-id = ns-adm / ns-odm
ns-adm = (id-text ["@" full-date]) / id-num
ns-odm = ("!" id-text) / ("-" id-num)
; Type is restricted to valid object types, within the "val-seg" set
obj-type = id-text / ("-" id-num)
; Object ID, within the "val-seg" set
obj-id = id-text / id-num

Some examples of object reference values are below.¶

ari://example-adm-a@2024-06-25/EDD/someobj
ari://example-adm-a/EDD/someobj
ari://example-adm-a/CTRL/otherobj(true,3)
ari://example-adm-a/CTRL/otherobj(%22a%20param%22,/UINT/10)
ari://65536/-1/0
ari://!example-odm-b/VAR/counter
ari://-20/-11/84

4.4. Namespace References

Based on the structure of Section 3.4, the text form of the namespace reference ARI is a URI with one path segment, corresponding to the namespace ID, followed by a path separator. The path separator is necessary to distinguish this from a untyped literal value.¶

The namespace reference ARI has the following ABNF definition.¶

nsref-ssp-struct = "//" ns-id "/"

Some examples of namespace reference values are below.¶

ari://example-adm-a@2024-06-25/
ari://example-adm-a/
ari://65536/
ari://!example-odm-b/
ari://-20/

4.5. ARI References

The text form of ARI can contain a URI Reference, as defined in Section 3 of [RFC3986], only for the specific case of eliding the namespace of Object Reference values. In this case, its object path SHALL start with the relative path segment "." (see the ns-part rule of Section 4.3).¶

Examples of text name and integer enumerated identifiers in an ARI Reference are below.¶

ari:./CTRL/do_thing
ari:./CTRL/otherobj(%22a%20param%22,/UINT/10)
ari:./-2/30

ARI Reference resolution is discussed in Section 6.2.¶

5. ARI Binary Form

This section defines how the data model explained in Section 3 is encoded as a binary sequence conforming to the CBOR syntax of [RFC8949]. Within this section the term "item" is used to mean the CBOR-decoded data item which follows the logical model of CDDL [RFC8610].¶

The binary form of the URI is intended to be used for machine-to-machine interchange so it is missing some of the human-friendly shortcut features of the ARI text form from Section 4. It still follows the same logical data model so it has a one-for-one representation of all of the styles of text-form ARI.¶

While this text description is normative, the CDDL schema in this section provides a more explicit and machine-parsable binary schema.¶

ari = lit-ari / objref-ari

5.1. Intermediate CBOR

The CBOR item form is used as an intermediate encoding between the ARI data and the ultimate binary encoding. When decoding a binary form ARI, the CBOR must be both "well-formed" according to [RFC8949] and "valid" according to the CDDL model of this specification. Implementations are encouraged, but not required, to use a streaming form of CBOR encoder/decoder to reduce memory consumption of an ARI handler. For simple implementations or diagnostic purposes, a two stage conversion between ARI--CBOR and CBOR--binary can be more easily understood and tested.¶

5.2. Literals

Based on the structure of Section 3.2, the binary form of the literal ARI contains a data item along with an optional AMM literal type identifier. In order to keep the encoding as short as possible, the untyped literal is encoded as the simple value itself. Because the typed literal and the object reference forms uses CBOR array framing, this framing is used to disambiguate from the pure-value encoding of the lit-notype CDDL symbol.¶

When present, the literal type SHALL be an integer enumeration. When typed, the decoded literal value SHALL be a valid CBOR item conforming to the AMM literal type definition of the $lit-typeval CDDL socket. When untyped, the decoded literal value SHALL be one of the primitive types named by the lit-notype CDDL symbol.¶

The literal ARI, both typed and untyped, has the following CDDL definition.¶

lit-ari = lit-typeval / lit-notype

; undefined value is only allowed as non-typed literal
lit-notype = undefined / null / bool / int / float / tstr / bstr

lit-typeval = $lit-typeval .within lit-typeval-struct
lit-typeval-struct = [
  lit-type: lit-type-id,
  lit-value: any
]
lit-type-id = (int32 .ge 0)


; IANA-assigned literal types
$lit-typeval /= [0, null]
$lit-typeval /= [1, bool]
$lit-typeval /= [2, uint .size 1] ; 1-byte
$lit-typeval /= [4, int32] ; 4-byte
$lit-typeval /= [5, uint32] ; 4-byte
$lit-typeval /= [6, int64] ; 8-byte
$lit-typeval /= [7, uint64] ; 8-byte
$lit-typeval /= [8, float16 / float32]
$lit-typeval /= [9, float16 / float32 / float64]
$lit-typeval /= [10, tstr]
$lit-typeval /= [11, bstr]

; Absolute timestamp as seconds from DTN Epoch
$lit-typeval /= [12, lit-time]
; Relative time interval as seconds
$lit-typeval /= [13, lit-time]
lit-time = int / time-fraction
; Same structure as tag #4 "decimal fraction" but limited in domain
time-fraction = [
  exp: (-9 .. 9) .within int,
  mantissa: int,
]

; Parameter label
$lit-typeval /= [14, lit-label]
lit-label = int64 / id-text

; Embedded CBOR item
$lit-typeval /= [15, lit-cbor]
lit-cbor = bstr .cbor any

; Literal type ID value
$lit-typeval /= [16, lit-type-id]

; Ordered list of ARIs
$lit-typeval /= [17, ari-collection]
ari-collection = [*ari]

; Map from untyped literal to ARI
$lit-typeval /= [18, ari-map]
ari-map-key = lit-notype
ari-map = {*ari-map-key => ari}

; Table of ARIs
$lit-typeval /= [19, ari-tbl]
ari-tbl = [
  ncol: uint, ; Number of columns in the table
  *ari ; All rows are concatenated in the single array
]

; Execution-Set
$lit-typeval /= lit-execset
lit-execset = [20, exec-set]
exec-set = [
  nonce,
  exec-targets,
]
nonce = bstr / uint / null
exec-targets = (*objref-ari)

; Reporting-Set
$lit-typeval /= lit-rptset
lit-rptset = [21, rpt-set]
rpt-set = [
  nonce,
  ref-time: lit-time, ; Interpreted as a TP absolute time
  *rpt-container
]
rpt-container = [
  rel-time: lit-time ; Interpreted as a TD relative to ref-time
  source: objref-ari,
  rpt-items
]
rpt-items = (*ari)

Some example of the forms for a literal are below. These first are untyped primitive values:¶

true

"text"

And these are typed values:¶

[4, 10]

[15, <<10>>]

5.3. Object References

Based on the structure of Section 3.3, the binary form of the object reference ARI is a CBOR-encoded item. An ARI SHALL be encoded as a CBOR array with at least three items corresponding to the namespace-id, object-type, and object-id. Those three items are referred to as the object path. The optional fourth item of the array is the parameter list.¶

The namespace-id SHALL be present only as an integer enumeration. The object-type SHALL be present only as an integer enumeration. The object-id SHALL be present as either a text name or an integer enumeration. The processing of text name object path components by an Agent is optional and SHALL be communicated to any associated Manager prior to encoding any ARIs for that Agent.¶

When present, the parameters SHALL be either the ari-collection or ari-map structure. In other words, just the value-portion of the AC or AM typed literal because no other disambiguation needs to be made for the parameter type.¶

The object reference ARI has the following CDDL definition.¶

; Type-agnostic structure of object reference
objref-ari = $objref-ari .within objref-ari-struct
objref-ari-struct = [
  ns-id,
  obj-type-id,
  obj-id,
  ?params
]

; Path for a single object
obj-path<obj-type> = (
  ns-id,
  obj-type,
  obj-id,
)
; The null ns-id means an ARI Reference
ns-id = int64 / id-text / null
; The null obj-type-id and obj-id mean a Namespace Reference
obj-type-id = (int32 .lt 0) / id-text / null
obj-id = (int32 .ge 0) / id-text / null

params = ari-collection / ari-map

; Generic usable for restricting objref-ari by type
objref-type<obj-type> = [
  obj-path<obj-type>,
  ?params
]

; IANA-assigned object types
IDENT = -1
$objref-ari /= objref-type<IDENT>
CONST = -2
$objref-ari /= objref-type<CONST>
CTRL = -3
$objref-ari /= objref-type<CTRL>
EDD = -4
$objref-ari /= objref-type<EDD>
OPER = -6
$objref-ari /= objref-type<OPER>
SBR = -8
$objref-ari /= objref-type<SBR>
TBR = -10
$objref-ari /= objref-type<TBR>
VAR = -11
$objref-ari /= objref-type<VAR>
TYPEDEF = -12
$objref-ari /= objref-type<TYPEDEF>

An example object reference without parameters is:¶

[41, -1, 0]

Another example object reference with parameters is:¶

[41, -2, 3, ["a param", [4, 10]]]

5.3.1. Namespace References

Based on the structure of Section 3.4, the binary form of the namespace reference ARI is a specialization of the object reference encoding as defined below.¶

nsref-ari = [ns-id, null, null] .within objref-ari-struct

Some examples of namespace reference values are below.¶

["example-adm-a@2024-06-25", null, null]

["example-adm-a", null, null]

[65536, null, null]

["!example-odm-b", null, null]

[-20, null, null]

5.3.2. ARI References

The binary form of ARI includes the ability to encode a URI Reference only for the specific case of eliding the namespace of Object Reference values. In this case the namespace portion of an object path is replaced by the CBOR value null as defined below.¶

ariref-ari = [null, obj-type-id, obj-id, ?params] .within objref-ari-struct

Examples of text name and integer enumerated identifiers in an ARI Reference are below.¶

[null, "CTRL", "do_thing"]

[null, -2, 30]

ARI Reference resolution is discussed in Section 6.2.¶

11. IANA Considerations

This section provides guidance to the Internet Assigned Numbers Authority (IANA) regarding registration of schema and namespaces related to ARIs, in accordance with BCP 26 [RFC1155].¶

11.1. URI Schemes Registry

This document defines a new URI scheme "ari" in Section 4. A new entry has been added to the "URI Schemes" registry [IANA-URI] with the following parameters.¶

Scheme name:: ari¶
Status:: Permanent¶
Applications/protocols that use this scheme name:: The scheme is used by DTNMA Managers and Agents to identify managed objects.¶
Contact:: IETF Chair <chair@ietf.org>¶
Change controller:: IESG <iesg@ietf.org>¶
Reference:: Section 4 of [This document].¶

11.2. DTN Management Architecture Parameters

This document defines several new registries within the "DTN Management Architecture Parameters" registry group.¶

This document defines a new registry "Literal Types" within the "DTN Management Architecture Parameters" registry group [IANA-DTNMA] containing initial entries from Table 2. Enumerations in this registry SHALL be non-negative integers representable as CBOR uint type with an argument shorter than 4-bytes. Names in this registry SHALL be unique among all entries in this and the "Managed Object Types" registry. The registration procedure for the Literal Types registry is Specification Required.¶

Table 2: Literal Types
Enumeration	Name	Description	Reference
0	`NULL`	The singleton `null` value.	[This document]
1	`BOOL`	A native boolean `true` or `false` value.	[This document]
2	`BYTE`	An 8-bit unsigned integer.¶ The valid domain is 0 to 2^8-1 inclusive.¶	[This document]
4	`INT`	A 32-bit signed integer.¶ The valid domain is -2^31 to 2^31-1 inclusive¶	[This document]
5	`UINT`	A 32-bit unsigned integer.¶ The valid domain is 0 to 2^32-1 inclusive¶	[This document]
6	`VAST`	A 64-bit signed integer.¶ The valid domain is -2^63 to 2^63-1 inclusive¶	[This document]
7	`UVAST`	A 64-bit unsigned integer.¶ The valid domain is 0 to 2^64-1 inclusive¶	[This document]
8	`REAL32`	A 32-bit [IEEE.754-2019] floating point number.	[This document]
9	`REAL64`	A 64-bit [IEEE.754-2019] floating point number.	[This document]
10	`TEXTSTR`	A text string composed of (unicode) characters in accordance with [RFC3629].	[This document]
11	`BYTESTR`	A byte string composed of 8-bit values.	[This document]
12	`TP`	An absolute time point (TP) in the DTN Epoch of Section 4.2.6 of [RFC9171].	[This document]
13	`TD`	A relative time difference (TD) with a sign.	[This document]
14	`LABEL`	A text label of a parent object parameter. This is only valid in a nested parameterized ARI.	[This document]
15	`CBOR`	A byte string containing an encoded CBOR item. The structure is opaque to the Agent but guaranteed well-formed for the ADM using it.	[This document]
16	`ARITYPE`	An integer or text value representing one of the code points in this Literal Types registry or the Managed Object Types registry.	[This document]
17	`AC`	An array containing an ordered list of ARIs.	[This document]
18	`AM`	A map containing keys of primitive ARIs and values of ARIs.	[This document]
19	`TBL`	A two-dimensional table containing cells of ARIs.	[This document]
20	`EXECSET`	A structure containing values to be executed by an Agent.	[This document]
21	`RPTSET`	A structure containing reports of values sampled from an Agent.	[This document]
22 to 254		Unassigned
255	`LITERAL`	A reserved type name for the union of all possible literal types.	[This document]
256 to 65279		Unassigned
65280 to 2147483647		Enumerations that are 216-28 and larger are reserved for private or experimental use.	[This document]

This document defines a new registry "Managed Object Types" within the "DTN Management Architecture Parameters" registry group [IANA-DTNMA] containing initial entries from Table 3. Enumerations in this registry SHALL be negative integers representable as CBOR nint type with an argument shorter than 4-bytes. Names in this registry SHALL be unique among all entries in this and the "Literal Types" registry. The registration procedure for the Managed Object Types registry is Specification Required.¶

Table 3: Managed Object Types
Enumeration	Name	Description	Reference
-1	`IDENT`	Identity Object	[This document]
-2	`CONST`	Constant	[This document]
-3	`CTRL`	Control	[This document]
-4	`EDD`	Externally Defined Data	[This document]
-6	`OPER`	Operator	[This document]
-8	`SBR`	State-Based Rule	[This document]
-10	`TBR`	Time-Based Rule	[This document]
-11	`VAR`	Variable	[This document]
-12	`TYPEDEF`	Named semantic type	[This document]
-13 to -255		Unassigned
-256	`OBJECT`	A reserved type name for the union of all possible object types.	[This document]
-257 to -65280		Unassigned
-65281 to -2147483648		Enumerations that are -1-(216-28) and larger are reserved for private or experimental use.	[This document]

IANA has annotated the "Literal Types" and "Managed Object Types" registries with the following note:¶

The enumeration and name of all entries managed by IANA are unique acorss both the "Literal Types" and "Managed Object Types" registries.¶

This document defines a new registry "Application Data Models" within the "DTN Management Architecture Parameters" registry group [IANA-DTNMA] containing initial entries from Table 5. Enumerations in this registry are non-negative integers representable as CBOR uint type with an argument shorter than 8-bytes. The registration procedures for this registry are indicated in Table 4.¶

Table 4: Application Data Models Registration Procedures
Enumeration Range	Registration Procedure
1 to 24	Standards Action With Expert Review
25 to 255	Private Use
256 to 4294967296	Specification Required

Table 5: Application Data Models
Enumeration	Reference	Notes
0	[This document]	Value zero is reserved.
1 to 24		Unassigned
25 to 255	[This document]	Enumerations with 8-bit size are reserved for Private Use
256 to 65535		Unassigned
65536 to 65546	[This document]	Reserved for example ADMs
65547 to 4294967296		Unassigned
4294967296 and larger	[This document]	Enumerations that are larger than 32-bit are reserved for private or experimental use.

Appendix A. Example Equivalences

This section contains examples of converting between text name and integer enumeration of ARI components and converting between text form and binary form of entire ARIs. The examples in this section rely on the ADM and ODM definitions in Table 6 and Table 7 respectively.¶

Table 6: Example ADMs
Enumeration	Name
65536	example-adm-a
65537	example-adm-b

Table 7: Example ODMs
Enumeration	Name
-10	odm10

Given those namespaces, the example objects are listed in Table 8 where the Namespace column uses the ARI text form convention.¶

Table 8: Example Objects
Namespace	Object Type	Enumeration	Name	Signature
example-adm-a	EDD	3	num_bytes	()
example-adm-a	CTRL	2	do_thing	(AC targets, UINT count)
example-adm-a	CONST	1	rpt_with_param	(ARI var, TEXTSTR text)
example-adm-a	TYPEDEF	1	distance	()
!odm10	VAR	1	my_counter	()

The TYPEDEF distance is defined to be an augmented use of uint with scale of 1.0 and unit of meter.¶

Each of the following examples illustrate the comparison of ARI forms in different situations, covering the gamut of what can be expressed by an ARI.¶

A.1. Primitive-Typed Literal

This is the literal value 4 interpreted as a 32-bit unsigned integer. The ARI text (which is identical to its percent-encoded form) is:¶

ari:/UINT/4

which is translated to enumerated form:¶

ari:/5/4

and converted to CBOR item:¶

[5, 4]

and finally to the binary string of:¶

0x820504

A.2. Timestamp Literal

This is the timestamp "2000-01-01T00:16:40Z" which is DTN Epoch plus 1000 seconds. The ARI text (which is identical to its percent-encoded form) is:¶

ari:/TP/20000101T001640Z

which is translated to enumerated form:¶

ari:/12/1000

and converted to CBOR item:¶

[12, 1000]

and finally to the binary string of:¶

0x820c1a000f4240

A.3. Semantic-Typed Literal

This is the literal value 20 interpreted as a semantic type distance from example-adm-a. The ARI text (which is identical to its percent-encoded form) is:¶

ari://example-adm-a/TYPEDEF/distance(20)

which is translated to enumerated form:¶

ari://65536/-12/1(20)

and converted to CBOR item:¶

[65536, -12, 1, [20]]

and finally to the binary string of:¶

0x841A000100002B018114

A.4. Complex CBOR Literal

This is a literal value embedding a complex CBOR structure. The CBOR diagnostic expression being encoded is¶

<<{"test": [3, 4.5]}>>

which can be directly percent encoded as¶

ari:/CBOR/%3C%3C%7B%22test%22%3A%5B3%2C4.5%5D%7D%3E%3E

The embedded item can further be CBOR-encoded to a byte string and percent-encoded, along with a translated type enumeration of:¶

ari:/15/h'A164746573748203F94480'

and converted to CBOR item (note the byte string is no longer text-encoded):¶

[15, h'A164746573748203F94480']

and finally to the binary string of:¶

0x820F4BA164746573748203F94480

A.5. Non-parameterized Object Reference

This is a non-parameterized num_bytes object in the ADM namespace. The ARI text (which is identical to its percent-encoded form) is:¶

ari://example-adm-a/edd/num_bytes

which is translated to enumerated form:¶

ari://65536/-4/3

and converted to CBOR item:¶

[65536, -4, 3]

and finally to the binary string of:¶

0x831A000100002303

A.6. Parameterized Object Reference

This is an parameterized do_thing object in the ADM namespace. Additionally, the parameters include two relative-path ARI References to other objects in the same ADM, which are resolved after text-decoding. The ARI text (which is identical to its percent-encoded form) is:¶

ari://example-adm-a/ctrl/do_thing(/AC/(),3)

ari://example-adm-a/ctrl/do_thing(/AC/(./edd/num_bytes,//!odm10/var/my_counter),3)

which is translated to enumerated and resolved form:¶

ari://65536/-3/2(/17/(//65536/-4/3,//-10/-11/1),3)

and converted to CBOR item:¶

[65536, -3, 2, [
  [17, [
    [65536, -4, 3],
    [-10, -11, 1]
  ]],
  3
]]

and finally to the binary string of:¶

0x841A00010000220282821182831A00010000230383292A0103

A.7. Recursive Structure with Percent Encodings

This is a complex example having nested ARIs, some with percent-encoding needed. The human-friendly (but not valid URI) text for this case is:¶

ari://example-adm-a/rptt/rpt_with_param("text")

which is percent encoded to the real URI:¶

ari://example-adm-a/rptt/rpt_with_param(%22text%22)

which is translated to enumerated form:¶

ari://65536/-7/1(%22text%22)

and converted to CBOR item:¶

[65536, -7, 1, ["text"]]

and finally to the binary string of:¶

0x841A000100002601816474657874